{"id":577,"date":"2016-06-07T14:46:16","date_gmt":"2016-06-07T18:46:16","guid":{"rendered":"https:\/\/rhiel.com\/?p=577"},"modified":"2024-03-15T12:49:45","modified_gmt":"2024-03-15T16:49:45","slug":"automatic-scrubber-wont-pick-up-water","status":"publish","type":"post","link":"https:\/\/rhiel.com\/automatic-scrubber-wont-pick-up-water\/","title":{"rendered":"Why Won’t My Automatic Scrubber Pick Up Water?"},"content":{"rendered":"

This is part 3 of a 5 part series on common automatic floor scrubber problems. To recap, the first part is an overview of all the problems discussed<\/a> and the second part is focused why your scrubber isn’t\u00c2\u00a0putting water down<\/a> and if you’re reading this then you probably are either having issue with your scrubber not picking up water or are interested in learning some of the potential reasons for a scrubber leaving water behind.<\/p>\n

Vacuuming up the dirty water on an automatic scrubber hasn\u00e2\u20ac\u2122t changed a whole lot since the machines were first developed. \u00c2\u00a0It is basically a vacuum motor pulling air and water through a hose attached to a squeegee on the rear of the scrubber. \u00c2\u00a0The vacuum motor may be a 12, 24 or 36 volt motor, and it may be found in different places in the machine depending on the make and model, but the principle is the same. Some squeegees are lowered by hand and some lower automatically when the machine moves forward with the water control turned on. \u00c2\u00a0Some vacuum motors are turned on with a switch and others turn on automatically when the squeegee is lowered. \u00c2\u00a0Assuming that the vacuum motor is operating and the squeegee mechanism is down, let\u00e2\u20ac\u2122s take a look at why you may not be picking up the dirty water.<\/p>\n