Tag Archive for: infection prevention

A Brief Analysis of the RNC Norovirus Outbreak

As you may have read there have been 11 reported cases of what appears to be norovirus among the California delegation at the Republican National Convention. Whether or not it is norovirus this brings into question how situations such as these should be handled. (If you are an impatient reader and already understand what norovirus is then just skip the next few paragraphs so you can see the action plan.)
Before I start I want you to know that there is no reason to be panicked. As of now only the 11 said individuals have been affected. From any reports I can see there is no evidence that the virus has spread to others. This doesn’t mean you should be careless. It is still good practice to frequently wash your hands and when possible limit direct contact with others. I know it is easier said than done, but attempting to do so will limit the ability of the virus, or any pathogen really, to move. For more on why you should not be overly worried check out this article from Cleveland.com.

A crash course on norovirus

First, since norovirus is the virus in question let’s take a look at a few facts about norovirus from the CDC:

  • Norovirus causes 19 to 21 million cases of acute gastroenteritis in the U.S. each year
  • There are many types of norovirus so you can get it more than once
  • Each year, norovirus causes 56,000 to 71,000 hospitalizations and 570 to 800 deaths, mostly in young children and the elderly
  • Norovirus can stay on objects and surfaces and still infect people for days or weeks
  • Norovirus is hard to kill and can survive some disinfectants (such as quats)

It is important to note that as mentioned above one of the best things you can do is wash your hands frequently–remember wash for at least 20 seconds, or in other words sing happy birthday twice. More CDC norovirus info.

Analysis of the Current Problem

Now to the issue at hand. At this point there are individuals who have already been sick, meaning there are potentially a large number of objects and surfaces that may still be harboring the pathogen. This is a big issue and is amplified due to the obvious connection with the RNC. Any spread of pathogens from the Resort outside of the city, where the affected delegates are staying, to the convention would mean all convention attendees are at risk. To further amplify things this isn’t just any convention it is a convention where people have come from all over the world to see who the Republican party selects as their choice to potentially be President of the United States of America.

I hope I have been able to at least partially convey the importance of addressing this issue with a swift and calculated response. I certainly don’t intend to alarm you and also don’t think you have a need to be overly alarmed. There methods available to effectively and efficiently deal with this problem.

Infection Prevention

We are in the business of improving the health of facilities and are very aware of effective ways to handle these problems. Obviously the best thing to do is to have a solid infection prevention process in place. In this case, however, the virus was brought with the affected individuals and great prevention can’t stop a sick person from showing up. Where a good infection prevention process will help is by limiting the ability of the virus to spread once it is introduced into a facility. If you are properly disinfecting to begin with then you can be confident that the virus will be contained.

I don’t know what kind of infection prevention protocol is currently in place, but my guess is that it is nothing very formal. I think this because if there were a solid process in place it would have been already released by the resort or the RNC. Chances are they are being reactive rather than proactive. I am not being critical of them because having a proactive plan for infection prevention is not done by many facilities. They may have a rough, informal process, but a strong protocol allows the facility to ease concerns before they begin.

Potential Solutions

Now let’s look at what can be done. As mentioned in the CDC facts above norovirus can be difficult to kill. Quaternary based disinfectants are ineffective; bleach is, but is nasty to deal with and can cause allergic reactions. I recommend using activated water, or engineered water. This is some newer technology that is now growing in adoption. It is a solution that can be generated at your facility and is probably more effective than what you are using now. The big benefit is that it has none of the negative health side effects associated with the harsh chemicals used in traditional disinfectants. Follow the links for more information on on-site generation and activated water.

The product of choice for me is GenEon. The disinfectant produced by their machines can kill norovirus with only 30 seconds of dwell time when mixed to the proper strength. To give you an idea most disinfectants require anywhere from 5 to 10 minutes of dwell time to achieve their kill claims.

Why is this dwell time important?

In the situation at hand speed is key. If the facility maintenance crew only has to wait 30 seconds vs. 5 minutes they can disinfect significantly faster allowing them to cover more surface area in a given amount of time. This means two things; they can quickly ensure that the virus is eliminated, but also they can increase the frequency with which they disinfect their facility. This means that instead of disinfecting 1, maybe 2, times a day they can now disinfect 3 or 4 or even more. As soon as a surface is touched after being disinfected it is contaminated again so frequent disinfection addresses this reality.

How should this be handled?

They have already quarantined the affected individuals so that will help keep them from spreading the virus. Now they need to address any of the areas where the virus may still exist. Due to the nature of how pathogens move the virus may now be in areas where the affected individuals have never been. So prioritizing is the top priority.

These are the areas that should be treated and the order in which they should be treated.

  • Any transportation from the resort to the convention
    • This obviously is a high risk area due to the fact that it can allow the virus to quickly move 60 miles from the resort to a city full of people.
  • Any high traffic areas with high frequency touch points
    • This would include the lobby, any escalators focusing on handrails, stair cases again focusing on handrails, any common meeting/eating areas, any common areas or corridors accessible only by staff.
  • Lower traffic areas with medium frequency touch points
    • Hallways to rooms with a focus on walls and door knobs, lower frequency exits (staff exits and such), any remaining staff only areas.
  • Anywhere that was not covered above

In this case attempting to disinfect such a large area by having people spray the surface, wait 30 seconds, and wipe will take a long time. That’s why I would recommend a misting applicator and if you can a mister that utilizes electrostatics to ensure better coverage. This will allow personnel to simply mist a room/area and then just leave and let air dry. Using the GenEon product will not leave a residual so there is no reason it must be wiped.

These are just some quick thoughts and our experts can help design a program for you that is tailored to your facility. Follow these links for more information on GenEon and our electrostatic disinfection applicator, E-Mist.



infection prevention consultation

Do You Properly Disinfect Your Surfaces?

As a society we smell a strong chemical odor with a hint of lemon and we think the surface has been disinfected. We spray bleach and wipe and we think we have killed germs. Who can blame us? That’s what has been advertised. That’s how, as a society, we have been conditioned to think. Products have even been introduced to clean and disinfect at the same time. Is this possible? The answer is yes and no.

First of all not all cleaners are a disinfectant. That’s an important distinction to make. With that said, cleaning and disinfecting should always be a 2 step process. First we clean spots and stains and dirt and dust, then we go back to the surface for proper disinfecting and the killing of viruses and bacteria and pathogens.

So what’s the key to the latter? Killing of viruses, bacteria and pathogens takes dwell time. If you read the instructions on your product, you will find that there is a specific amount of time the product needs to sit on the surface to be effective in eliminating the virus or bacteria or pathogen. Without the dwell time, you’re not eliminating anything. In fact in all likelihood you’re spreading the viruses and bacteria on your sponge or rag from one surface to another, this is called cross contamination. This holds true for floor mops as well.

The second key to proper surface disinfection is frequency of disinfecting. It’s important to develop a calendar of cleaning and disinfecting based on the usage of the space. What that means is the more a space or surface is touched the more it should be treated. All to often we clean and disinfect for time and appearance and not for health, this is a big mistake. If you adopt the proper disinfecting protocol for your surfaces and space it will actually save you time and labor costs as well as chemical costs, and your space will be healthier.

The next step to properly disinfecting is to touch all the spots! If you miss a spot, you miss a virus or bacteria. It’s important to be consistent in your application of products and to make sure you cover all the space. We can identify touch points by high, medium, and low, for example a door handle or light switch would be high, a table top may be medium, while a clock in a room on the wall may be low. Your disinfecting protocol must identify these touch points and be sure they are consistently treated to have favorable success in your disinfecting.

To achieve the outcomes desired, the delivery system of product is vital to the success of the protocol. First it must be safe to use, protecting the user against irritation and damage to exposed skin . Traditional spray bottles are uncontrolled and inconsistent and therefore poses a greater risk to the user. Foggers can create an airborne condition getting into the ventilation system of the building and create inhalation issues. Touchless Electrostatic Technology has proven to eliminate these risks and to cover 100% of the touch points on the surfaces and space.

In our next blog, we will discuss what Touch Point Healthy Certification means for your surfaces and space, and how Rhiel Innovative Solutions can make your buildings and surfaces safer and healthier through Touch Point Health and Electrostatic Surface Disinfection.


Learn About Our Electrostatic Disinfection System

GenEon TRIO RX and U.S. EPA Registration

GenEon Technologies (San Antonio, TX) has just announced that their TRIO RX On-Site Generation system is now capable of producing a U.S. EPA Registered Disinfectant. This is a huge step forward for on-site generation (OSG) technology and infection prevention as a whole. Being registered by the EPA now allows GenEon to more effectively combat the spread of infection in schools, healthcare facilities and food service and food prep facilities. It is important to note that solution generated by the GenEon system is chemical-free. The registration number now puts this OSG chemical-free solution at the same level as chemical disinfectants manufactured in factories. Chemical-free cleaning and sustainable maintenance practices have come a long way since they first arrived in the industry and this is perhaps one of the greatest advancements to date.

Who is GenEon?

GenEon is a design-development company that is committed to sustainable, intuitive designs that allow our customers to have healthier, more effective alternatives to chemical disinfectants. – John Shanahan, Vice President GenEon

This quote from the GenEon announcement of their registration number–found here–sums up the big picture view of who GenEon is and what they are trying to accomplish. The company provides several different units that generate the chemical-free solutions. On-site generation is simply the process of generating your cleaning or disinfecting solution at your facility as opposed to buying a chemical or product that is manufactured elsewhere. Currently their systems can produce a glass cleaner/general purpose cleaner, a heavy-duty degreaser, a cleaner/sanitizer and a cleaner/disinfectant. This replaces virtually all of the cleaning chemicals used on a daily basis for facility maintenance. They have a wide range of systems from low volume units for small facilities to high volume units for larger facilities. GenEon is currently at the forefront of the shift toward a sustainable, smarter approach to cleaning/disinfecting. To learn more about GenEon check out their about us page.

What is Chemical-Free Cleaning

Chemical-free cleaning in the the context in which we are using it is a sustainable alternative to using traditional chemical cleaners. There are many names for this technology such as smart water, engineered water, activated water, electrochemical activation (eca), electrolyzed water. For more information on these types of technologies checkout this Sanitary Maintenance article. In recent years this technology has made great strides, the headline of this article being one of them, that are beginning to reshape and reinvent the way the world sees cleaning. Chemical-free cleaning allows front line workers to not be exposed to hazardous chemicals everyday which will be a great benefit to their health, it allows facility occupants to not be exposed to any left over residue and it is a positive benefit to the environment. Facilities of the future will all utilize this technology and pair it with other sustainable practices which will create a better, brighter future for all of us.

The sanitary supplies industry is rapidly moving into the future and changing the way the world views cleaning. Follow our blog to keep current on more

 

Discover more information about GenEon Technologies by visiting their website www.geneontechnologies.com

 

geneon image cta

5 Tips For A Healthier Workplace

Stuffy nose, runny nose, fever, cough, sore throat, fatigue, muscle aches—sound familiar? We have all had the flu and experienced the discomfort of the common cold. With cold and flu season upon us employers need to ensure that the necessary precautions are taken to prevent the spread of these uncomfortable illnesses. Due to the average employee missing 7.7 days per year from sickness an estimated $225.8 billion is lost in our economy. With that being said you can certainly realize the importance of proper cold and flu prevention. So I wanted to take a moment to give some tips to help curb unplanned absences in your workplace or office.

Promote Healthy Hand Washing Habits

While somewhat of a cliché, encouraging proper hand washing habits is a very easy way to prevent an office outbreak. According to the CDC you should first wet your hands and apply soap and then later them with the soap; ensure you thoroughly cover your hands. Next you should scrub your hands for a minimum of 20 seconds. Rinse off the soap and dry your hands.

Have Hand Sanitizer Available

While hand sanitizer is not the first choice, it is useful in situations where running water is not available. It should be noted that hand sanitizer will not kill all types of germs. The CDC recommends applying the directed amount to your palms and then rubbing over all parts of your hands until dry.

Clean Commonly Touched Surfaces

These surfaces include computer mice, keyboards, desk phones, break room sink faucet handles, microwave door handles, refrigerator door handles, water fountain buttons, and vending machine buttons. If you think about how many of these surfaces you touch in a day it should not only help you remember to clean these surfaces, but also to wash your hands.

Encourage Employees to Maintain Healthy Fitness Levels

Part of maintaining overall health is certainly a healthy amount of exercise. Web MD cites aerobic exercise to aid the body in fighting off potential viruses. Consider starting a workplace exercise program and incent good physical health.

Use the Proper Cleaning Chemicals

Ensure you are using a disinfectant that has the ability to kill cold and flu viruses. Some examples would include quaternary ammonia, phenolic, or chlorine based cleaning products. It is also a good idea to have these products available to employees so they can keep their work stations clean and sanitary.

Some may seem so simple, but not enough businesses adhere to these best practices. I hope that you find these tips helpful and can use them to not only to reduce that $225.8 billion, but to create a happy and healthy work environment.